Zanussi Stainless Steel A Rated Electric Fan Oven
-
Easy to clean enamel interior
-
Stainless Steel
-
Grill pan and trivet included
-
Double glazed door
-
Oven light
-
3 cooking functions: ThermaFlow fan cooking, Grill and Defrost
-
2 chrome shelves included
Zanussi Stainless Steel 4 Burner Gas Hob
-
Side control
-
Push button ignition
-
Flame Safety Device
-
4 burner
-
Enamel pan supports
-
LPG kit included
MEP601 curved glass extractor
Features
•Ducted/recirculating
installation
•3 speeds
•Single fan motor
•Push button control
•Dishwashable aluminium
grease filters
•2 x Incandescent lights
•Glass light diffusers
•Telescopic chimney
Optional accessories
•Charcoal filter for recirculation:
CHA17
Technical specification
•Required height over gas hob:
750 mm
•Required height over electric
hob: 650 mm
•Outlet diameter: 125 mm
•Noise level: 58 dBA
•Extraction rate: 380 m3/hr
•Rated electrical power: 180 W
Available in
•Stainless steel
** Please note: There are no screws provided with this extractor**
SINK SPECIFICATIONS
Material: Stainless Steel
Overall Size: 965 x 500mm
Main Bowl Size: 345 x 395 x 160mm deep
Small Bowl Size:170 x 320 x 80mm deep
Cut Out Size: 945 x 480mm
Minimum Cabinet Size Required: 600mm
Tap hole diameter: 35mm
Reversible
Supplied as standard with:
Sealing strip
Plain tapholestopper
Clips
2 x 90mm Basket Strainer Wastes
Overflow
Franke sinks are guaranteed for 25 years against manufacturing defect. Franke will replace and where appropriate repair defective sinks. Any associated or ancillary costs to be incurred by you as a result of replacement of Franke sinks under this guarantee shall in all cases be previously approved by Franke UK Limited. This guarantee is in addition to and does not affect your statutory rights.
Flight Tap
Unique swan neck kitchen tap with geometric ‘Deco’ styling lines.
Full 1 year guarantee (return to base)
Chrome finish on solid brass
Ceramic disc technology for reliability
Quarter turn handles for easy operation
Aerated filter nozzle for foam effect and debris strain
HOT and COLD indicator rings on each handle
Supplied with all fixings and tail connectors to 15mm
Height from base 340mm
Height from base to spout tip 240mm
Diameter from centre of body line to tip of spout 200mm
Suitable for water systems with 0.5 bar or better supplies
